AJDm Deep Well Jet Pump

AJDm Deep Well Jet Pump

Application
- The deep well jet pump is used to transfer clean water or other liquids similar to water in physical and chemical properties.
- Deep well jet pumps are suitable for lifting water from the well, garden irrigation, pressure boosting of running water, and supporting equipment.

Features:
- Cast iron pump body and support under special rust resistant treatment.
- Stainless steel impeller.
- AISI 304 shaft.
- Max. liquid temperature: +40℃.
- Max. suction: +40m.

Motor Features:
- C&U bearing.
- Motor with copper winding.
- Built-in thermal protector for single phase motor.
- Insulation class: F.
- Protection class: IPX4.
- Max. ambient temperature: +40℃.

Identification Codes
Technical Data of AJDm2H Deep Well Jet Pump:
MODEL POWER HS (m) Q(l/min) 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30  
KW HP
AJDm55/2h 0.55 0.75 15 H (M) 37 33 30 27 25 23 21 19 17 15 13 ˗ ˗ ˗ ˗
AJDm75/2h 0.75 1 47 43 40 37 34 31 29 27 25 23 21 19 17 ˗ ˗ ˗
AJDm110/2h 1.1 1.5 70 65 61 57 53 50 47 44 42 40 38 36 34 32 30 28
AJDm55/2h 0.55 0.75 20 30 26 23 21 19 17 15 13 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm75/2h 0.75 1 39 36 33 30 27 24 22 20 18 17 ˗ ˗ ˗ ˗ ˗ ˗
AJDm110/2h 1.1 1.5 62 57 53 49 46 43 40 38 36 34 32 28 28 ˗ ˗ ˗
AJDm55/2h 0.55 0.75 25 23 19 16 14 12 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm75/2h 0.75 1 32 29 26 23 20 18 16 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm110/2h 1.1 1.5 54 49 45 42 39 36 33 31 29 27 ˗ ˗ ˗ ˗ ˗ ˗
AJDm55/2h 0.55 0.75 30 16 13 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm75/2h 0.75 1 25 22 19 16 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm110/2h 1.1 1.5 46 42 38 35 32 29 27 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm75/2h 0.75 1 35 18 15 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm110/2h 1.1 1.5 39 35 31 28 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm110/2h 1.1 1.5 40 32 28 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
Identification Codes
Technical Data of AJDm4H Deep Well Jet Pump
MODEL POWER HS (m) Q(l/min) 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34  
KW HP
AJDm55/4H 0.55 0.75 15 H (M) 39 35 33 29 27 25 23 21 19 17 15 14 13 ˗ ˗ ˗ ˗ ˗
AJDm75/4H 0.75 1 50 46 43 40 37 34 32 30 28 26 24 22 20 19 18 17 ˗ ˗
AJDm110/4H 1.1 1.5 75 70 66 62 58 55 52 49 47 45 43 41 39 37 35 33 31 29
AJDm55/4H 0.55 0.75 20 32 28 25 23 21 19 17 15 13 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm75/4H 0.75 1 42 39 36 33 30 27 25 23 21 20 18 17 ˗ ˗ ˗ ˗ ˗ ˗
AJDm110/4H 1.1 1.5 67 62 58 54 51 48 45 43 41 39 37 35 33 31 29 27 ˗ ˗
AJDm55/4H 0.55 0.75 25 25 21 18 16 14 12 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm75/4H 0.75 1 35 32 29 26 23 21 19 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm110/4H 1.1 1.5 59 54 50 47 44 41 38 36 34 32 30 28 ˗ ˗ ˗ ˗ ˗ ˗
AJDm55/4H 0.55 0.75 30 18 15 12 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm75/4H 0.75 1 28 25 22 19 17 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm110/4H 1.1 1.5 51 47 43 40 37 34 32 30 28 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm75/4H 0.75 1 35 21 18 16 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm110/4H 1.1 1.5 44 40 36 33 30 27 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm110/4H 1.1 1.5 40 37 33 30 27 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
AJDm Deep Well Jet Pump
Material Table of AJDm Deep Well Jet Pump:
No. Part Material No. Part Material
1 Elbow HT 200 14 Ejector HT 200
2 Gasket seal NBR 15 Sealing cup NBR
3 Pump body HT 200 16 Cooper sheathing HPb59-1
4 Diffuser PPO 17 Cooper sleeve HPb59-1
5 Impeller AISI 304 18 Terminal box ABS
6 Mechanical seal Carbon/Ceramic 19 Terminal board PC
7 O-ring NBR 20 Stator
8 Support cover AISI 304/HT 200 21 Motor foot PA6
9 Support ZL 102 22 Capacitor
10 Bearing 23 Cable holder
11 Rotor 24 Rear cover ZL 102
12 Venturi tube PPO 25 Fan PP
13 Nozzle PPO 26 Fan cover PP
AJDm Deep Well Jet Pump

LEO is a listed company in China (stock code 002131), and is a leading water pump manufacturer, offering only the highest quality pumps. We have manufactured more than a million pumps, now used in more than 140 countries. These pumps include commercial water pumps, submersible pumps, and wastewater pumps, as well as customizable pump solutions. We can meet any water pump requirement customers may have for both commercial and domestic pumping systems.